Threaded Studs with Dog Point - CFT
Coppered Steel | M3 - M10
Stainless Steel | M3 - M10
Aluminium | M3 - M8
- Capacitor Discharge Studs are designed to be welded to thin gauge sheet material using tip ignition according to the capacitors discharge welding process.
- Capacitor Discharge Studs are available in many different sizes, from a base diameter of a 2 mm stud up to 12 mm.
- Standard material for CD Studs are: Low Carbon Copper Flashed Steel, Stainless Steel, Aluminum Alloy, and Brass.
- Other grades, i.e. AISI 316 (A4), AISI 310 are available on request
- The stud flange is designed according to EN ISO 13918.
- Studs made of steel 4.8 are protected against corrosion by copper coating. (Thickness : 3 to 5 µm)
- On the end, they have a dog point to facilitate the alignment and rapid installation of nuts.
| d1 | l | d3 | h | nmax |
|---|---|---|---|---|
| M3 | 6 - 50 mm | 4.5 mm | 0.7 - 1.4 mm | 1.5 mm |
| M4 | 6 - 50 mm | 5.5 mm | 0.7 - 1.4 mm | 1.5 mm |
| M5 | 6 - 70 mm | 6.5 mm | 0.8 - 1.4 mm | 2 mm |
| M6 | 6 - 80 mm | 7.5 mm | 0.8 - 1.4 mm | 2 mm |
| M8 | 10 - 80 mm | 9.0 mm | 0.8 - 1.4 mm | 2 mm |
| M10 | 12 - 80 mm | 10.5 mm | 1.0 - 1.6 mm | 2 mm |
Advanced Studwelding Systems
We are an independent, ISO 9001:2015 Quality Approved Supplier for all your stud welding requirements
