Full Base - PD
Mild Steel
M5 - M24
Zinged Steel
M5 - M24
Stainless Steel
M5 - M24
- PD (Pitch diameter) welding studs are threaded studs, the base of the stud is the same diameter as the nominal thread diameter . The weld fillet is greater than the thread diameter
- Typical Use : PD studs are frequently used where maximum strength and economy are required
- Our standard Drawn Arc weld studs are available in Mild Steel Grade 4.8 and Stainless Steel A2 (AISI 304)
- Other grades, i.e. AISI 316 (A4), AISI 310 are available on request
- Drawn Arc studs come with a bright finish, but we can provide numerous other finishes, including zinc plating.
- All Drawn studs are supplied with ceramic ferrules, as these are essential to the Drawn Arc process
| Ø d | L Stud Length | ? d3 Weld Collar |
|---|---|---|
| M5 | 15 - 1000 mm | 7.5 mm |
| M6 | 15 - 1000 mm | 8.5 mm |
| M8 | 15 - 1000 mm | 11.0 mm |
| M10 | 15 - 1000 mm | 13.0 mm |
| M12 | 20 - 1000 mm | 16.0 mm |
| M14 | 20 - 1000 mm | 18.5 mm |
| M16 | 25 - 1000 mm | 21.0 mm |
| M20 | 25 - 1000 mm | 23.0 mm |
| M24 | 25 - 1000 mm | 29.0 mm |
Advanced Studwelding Systems
We are an independent, ISO 9001:2015 Quality Approved Supplier for all your stud welding requirements
